Описание
Application range
- Evens out trowel marks and irregularities on mineral STAUF levelling compounds
- Fills joints in dry screeds, for example, or between chipboard or OSB panels, wooden boards and STAUF mechanical detachment underlay panels
- Fills small cracks and holes, for example in combination with STAUF glass-fibre fabric
Suitable subfloors
- sanded mastic asphalt screed
- concrete C 25 / 30 according to DIN 1045 (non-skid surface)
- calcium sulphate (flow) floors
- Raised access floors
- wooden planks, wood fibre boards
- STAUF levelling compounds
- magnesite and plaster floors
- chipboards V100 (E1), OSB boards
- stone, ceramic, terrazzo, tiles
- unlaminated gypsum fibre boards
- cement floors
- STAUF mechanical detachment panels
- Metallic substrates, such as checker plate
- cavity floors
Product properties
- suitable on subfloor heating systems
- ductile during processing
- good adhesion to various materials
- suitable for castors swivel chairs according to DIN EN 12529
- can be feathered down to zero
- coverings can be laid after a very short time
Color
- white
Consumption in g/m² per mm layer thickness
- 1100g per mm layer thickness
Accessibility/ready for foot traffic
- after approx. 20 – 30 minutes at 20 °C and 65% rel. Humidity
Ready for installation
- elastic and textile coverings: approximately 0.5 to 1.5 hours
- parquet and cork after at least 12 hours
Additional instructions 1
- dust can be suppressed by priming with STAUF VDP 130, STAUF VDP 160 or STAUF D 54
Room climate at work site
- minimum 15 °C, maximum 75% rel. humidity, preferably max. 65%
Transport requirements
- dry
Storage requirements
- dry
Shelf-life
- 12 months
Giscode
- ZP1
Emicode
- EC1 plus
Available packaging
- 2 x 4.5 kg plastic sack including cup, stirring bar and trowel in a STAUF measuring bucket as set or 4 x 4,5 kg plastic sack
layer thickness
- 0–5 mm
Mixing ratio component A
- 4.5 kg of levelling compound
Mixing ratio component B
- 1.35 to 1.5 litres of water
Отзиви
Все още няма отзиви.