Замазка STAUF SSP RAPID

Описание

Application range

• levelling of floor screeds before bonding with STAUF wood flooring adhesives and adhesives for textile and elastic floorings

Suitable subfloors

• sanded mastic asphalt screed
• concrete C 25 / 30 according to DIN 1045 (non-skid surface)
• calcium sulphate (flow) floors
• wooden planks, wood fibre boards
• magnesite and plaster floors
• chipboards V100 (E1), OSB boards
• stone, ceramic, terrazzo, tiles
• cement floors
• cavity floors

Suitable primers

• STAUF VDP 130
• STAUF VPU 155 S + STAUF quartz sand
• STAUF D 54
• STAUF VDP 160
• STAUF VEP 195 + STAUF quartz sand
• STAUF WEP 180 + STAUF quartz sand

Product properties

• up to 1 mm suitable for castors swivel chairs according to DIN EN 12529
• suitable on subfloor heating systems
• pumpable
• very low emission
• tension reducing

Color

• light grey

Consumption in g/m² per mm layer thickness

• 1500g per mm layer thickness

Accessibility/ready for foot traffic

• after 1 hour at 20 °C, max 65% rel. humidity

Ready for installation

• 2–10 hours

Additional instructions 1

• Readiness for covering a layer 1 – 10 mm thick: Wood flooring: 4 hours (if using M2A types 10 hours), Cork and rubber flooring: 10 hours, Textile flooring, linoleum, PVC-CV flooring: 2 hours
• Readiness for covering a layer 10 – 20 mm thick: at least 14 hours
• Readiness for covering for a layer of 10 – 20 mm thick: at least 14 hours

Room climate at work site

• minimum 15 °C, maximum 75% rel. humidity, preferably max. 65%

Additional instructions 2

• Ready for installation layer thickness 1 – 10 mm:
• for wood flooring: 4 hours (using M2A-Types 10 hours)
• for cork and rubber floors: 10 hours
• for installation for textile coverings, lino, CV-Hoors: 2 hour

Transport requirements

• dry

Storage requirements

• dry

Shelf-life

• 6 months

Giscode

• ZP1

Emicode

• EC1 plus

Available packaging

• 25 kg paper bag

layer thickness

• 1 – 10 mm without aggregates
• minimum 1 mm below floor coverings
• min. 2 mm below wood flooring
• 05–20 mm with aggregate
• 3-10 mm with reinforcement fibres
• mastic asphalt screed 1-5 mm

Mixing ratio component A

• layer thickness 1 – 10 mm: 25 kg levelling compound
• layer thickness 05-20 mm: 25 kg levelling compound and 12 kg quartz sand

Mixing ratio component B

• 6 liter water