Замазка STAUF GS BASIC

Описание

Application range

• suitable below elastic/textile floor coverings

Suitable subfloors

• sanded mastic asphalt screed
• concrete C 25 / 30 according to DIN 1045 (non-skid surface)
• calcium sulphate (flow) floors
• wooden planks, wood fibre boards
• magnesite and plaster floors
• unlaminated gypsum fibre boards
• cement floors
• cavity floors

Suitable primers

• STAUF VDP 130
• STAUF VPU 155 S + STAUF quartz sand
• STAUF D 54
• STAUF VDP 160
• STAUF VEP 195 + STAUF quartz sand
• STAUF WEP 180 + STAUF quartz sand

Product properties

• suitable on subfloor heating systems
• pumpable
• self-levelling
• up to 1,5 mm suitable for castors swivel chairs according to DIN EN 12529

Color

• light grey

Consumption in g/m² per mm layer thickness

• 1500g per mm layer thickness

Accessibility/ready for foot traffic

• after 3 hours at 20 °C, max 65% rel. humidity

Ready for installation

• 24 hours at 20 °C, (with 2 mm layer thickness) max 65% rel. humidity

Additional instructions 1

• From 3 mm, layer thickness must be measured with a CM gauge. Nominal value less than or equal to 0.5 CM%.
• Without flammable components in accordance with DIN 4102: A1 and DIN EN 13501: A1fl.

Room climate at work site

• minimum 15 °C, maximum 75% rel. humidity, preferably max. 65%

Transport requirements

• dry

Storage requirements

• dry

Shelf-life

• 9 months

Giscode

• CP1

Emicode

• EC1 plus

Available packaging

• 25 kg paper bag

layer thickness

• 1–10 mm

Processing time

• approx. 30 minutes at 20 °C and 65% rel. humidity

Mixing ratio component A

• 25 kg levelling compound

Mixing ratio component B

• 6 liter water